PVC/PET/PP塑料胶片整平切片机

全自动整平切片覆膜机性能和特点:

1、 本机集覆膜、整平、切片于一体,能分切各种PVCPETPPAPETPSOPP等塑料卷材。

2   切片采用德国西门子高性能电机,机械式切片,速度快,平稳无振动。每分钟可切50-70张。

3   采用日本松下伺服电机送片,台湾永宏PLC控制、人机界面,切片尺寸准,精度高。触摸屏操作,多重防错报警功能。

4   全自动预热,提升温度快,到达温度后自动解除预热启动功能,7-8分钟即可切片。

5   整平覆膜切片机直接由滚筒内加温,无需外接油泵抽油,可保五年以上不换导热油。4条滚筒可设定,不同的温度值控制。自动调节4个滚筒的温度,恒温稳定。

6   油温滚筒与覆膜滚筒同步运行,保证胶片不会擦花。

7   本机自带全自动感应停机功能,胶片完成或中间有接头都能自动停机,收料部加装吹片功能,避免胶片擦花。

机器参数:

型号  HJ-100ZP

切片长度:20mm-2500mm

切片宽度:970mm

切片厚度:0.07-1.5mm

电压:380V

全机总功率:18KW

正常工作功率:6KW

机器长度:5.6M*1.56M*1.60M

放卷:单杆600mm  双杆380mm

重量:2500KG

机器配置:油压联合刀、塑料表面处理系统、双面复保护膜、分条器、静电清除器、人机界面、磁力刹车张力控制系统、自动缺料电眼,标准型双上料架。

卷材、卷材、胶片、磨砂片等全自动整平切片机器

详细描述: 
全自动PVC、PET、PP切胶片的机器、切PVC卷材的机器,切PET片材的机器,切PP磨砂片的设备

Plastic film flattening slicer

Automatic leveling slicing laminating machine performance and features:
1, the machine sets covered, leveling, sliced ​​in one, it can cut a variety of PVC, PET, PP, APET, PS, OPP and other plastic membrane.
2 slices by Germany's Siemens high-performance motor, mechanical sliced, fast, smooth without vibration. Cut 50-70 sheets per minute.
3 Japan Panasonic servo motor sheet feeding, Taiwan Yonghong PLC control, human-machine interface, slice size standards, high precision.Touch screen operation, multiple anti-wrong alarm.
4 automatic preheating, elevated temperatures fast, automatic release preheat start function after reaching temperature, 7-8 minutes slices.
5 leveling film slicer heated directly from inside the drum, no external oil pump oil, more than five years can not change insurance HTF. 4 cylinder can be set to different temperature control. Automatically adjust the temperature of the drum 4, temperature stabilization.
6 oil drum roller run synchronously with the film, the film does not guarantee scratch.
7 machine comes with automatic sensing shutdown, the film is completed or middle connectors can be automatically shut down, rewinding unit installation of blow-chip function, to avoid film scratch.
Machine parameters:
Model HJ-100ZP
Slice length: 20mm-2500mm
Slice width: 970mm
Slice thickness: 0.07-1.5mm
Voltage: 380V
The whole machine Total power: 18KW
Normal operating power: 6KW
Machine length: 5.6M * 1.56M * 1.60M
Maximum Unwinding: single pole double pole 380mm 600mm
Weight: 2500KG
Machine configuration: hydraulic joint knives, plastic surface treatment systems, double-sided complex protective film, slitting, electrostatic remover, HMI, magnetic brake tension control system, automatic electric eye shortage of material, standard double on the rack.
Web, web, film, scrub films, such as automatic leveling slicing machine
A detailed description: 
Automatic PVC, PET, PP film cutting machine, cutting machine PVC sheet, PET sheet cutting machines, cutting PP frosted piece of equipment